Categories

Bluetooth Adapter for Kenwood Multi-pin Connector

Bluetooth Adapter for Kenwood Multi-pin Connector
Brand: Pryme Radio Accessories
Product Code: BT-511
Availability: In Stock
Price: $125.00 $99.99
Qty:     - OR -   Add to Wish List
Add to Compare
BT-511
Bluetooth Adapter for Kenwood Multi-pin connector.
 
Bluetooth Adapter (Dongle) fits Kenwwod Two Way Radios with popular Multi-pin connector.

The PRYME BLU Adapter allows you to use a compatible wireless Bluetooth headset or other audio accessory with your two-way radio. The PRYME BLU Adapter is compatible with thousands of off the shelf consumer audio accessories and pairs easily, allowing you to operate wirelessly.

NOTE: The BT-511 is compatible only with Kenwood radios with 4-digit model numbers (example: TK-3180). Radios with 3-digit model numbers (example: TK-290) do not provide enough current to the accessory connector to power the Bluetooth Adapter. Some radios can be modified by a qualified technican to provide power by removing a current-limiting resistor.
 

The BT-511 is available in two different models (BT-511 and BT-511-S1).  These models are compatible with the following radios:

 

 

BT-511

BT-511-S1

NX-200

YES1

YES2

NX-210

YES1

YES2

NX-300

YES1

YES2

NX-410

YES1

YES2

NX-411

YES1

YES2

TK-2140

YES1

YES2

TK-2180

NO

YES2

TK-3140

YES1

YES2

TK-3180

NO

YES2

TK-5210

YES1

YES2

TK-5220

YES1

YES2

TK-5310

YES1

YES2

TK-5320

YES1

YES2

TK-5410

YES1

YES2

TK-5410D

YES1

YES2

 

1 The BT-511 is compatible with these radios, but the radio must be reprogrammed using the Kenwood cable and software.  In order for the Bluetooth adapter to properly get power from the radio, the following setting must be changed in the Kenwood software: Extended Function > Universal Connector Pin No. 11: HRS Adapter.

2 The BT-511-S1 is compatible with this radio without any reprogramming.  However, the “Smart Switch” function is disabled on this model of adapter.  The radio’s receive audio can only be heard over the Bluetooth headset.  When the Bluetooth headset is disconnected, receive audio will be muted unless the adapter is disconnected from the radio.

 

Kenwood Radios Not Listed:  Most older Kenwood radios with a multi-pin accessory connector do not provide enough power to the accessory port as it required by the Bluetooth adapter.  The PRYMEBLU Adapter requires approximately 80 mA of current at peak draw. If you are unsure whether your radio has enough current available
Powered By OpenCart
EarKit.com © 2017